2018 Hitachi Construction Machinery Construction / Production Excavators ZX350LC-6

Information

2018 Hitachi Construction Machinery Construction / Production Excavators ZX350LC-6

Accelerate your efficiency.

If you’re looking for more efficiency, reliability, and durability, the ZX350LC-6 has an insatiable appetite for work. Loaded with a new, fuel-efficient EPA Final Tier 4 (FT4)/EU Stage IV Isuzu engine, this excavator meets rigid emission standards and no diesel particulate filter is needed. And that’s not all. You’ll get generous swing torque, dig force, and lift capacity. The spacious cab is designed for operator comfort and productivity, and standard upper-structure handrails provide added safety and accessibility.

The ZX350LC-6 come standard equipped with five years of ZXLink™ Ultimate, giving you 24/7 online access to machine location, health, utilization, fuel consumption, and other valuable information – so you can better understand costs and jobsite performance.

Features may include:

Engine
  • The Isuzu EPA Final Tier 4 (FT4)/EU Stage IV engine delivers fuel-efficient and reliable performance. Fuel pressure, timing and volume are precisely regulated by electronic control for efficient combustion with Isuzu’s common-rail fuel injection system.
  • The pressurized fuel system improves fuel injector operation, and the fuel recirculation system helps prevent fuel gelling in cold climates – so you can maintain maximum productivity.
  • Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency.
Durable structure and undercarriage
  • Thick-plate, single-sheet mainframe, box-section track frames and industry-exclusive, double-seal swing bearing deliver rock-solid durability.
  • With large idlers, rollers, and strutted track links, the sealed and lubricated undercarriage is built for the long haul.
  • Reinforced D-channel side frames provide maximum cab and component impact protection.
  • Tungsten-carbide coated wear surfaces protect the critical bucket-to-arm joint.
  • Oil-impregnated bushings enhance durability and extend lube intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.
Hydraulics
  • Stay on schedule with generous swing torque, digging force, and lift capacity.
  • Whatever your grade system, Topcon, Trimble or Leica, Hitachi offers a grade reference-ready package that reduces installation time by half.

Photos

Highlights

  • Edmonton, Alberta
  • 2018
  • Hitachi Construction Machinery
  • Construction / Production Excavators ZX350LC-6
  • Available
  • over standard tracks: 3390 mm (11 ft 1 in ft/in)
  • Dig - Mono Boom: 10750 mm (35 ft 3 in ft/in) | Dump - Mono Boom: 7630 mm (25 ft ft/in)

Specifications

  • 2018
  • Hitachi Construction Machinery
  • Construction / Production Excavators
  • ZX350LC-6
  • General
  • Rating: Tier 4
  • (Per Engine): 6
  • 7.8 ltr (475 Inches³)
  • 1900 rpm
  • Output - Net: 202 kW (271 hp)
  • Bearing: 49.3 kPa (7.15 PSI)
  • Dipper Tearout: 159 kN (35745 lbf)
  • Tailswing Radius: 3600 mm (11 ft 10 in ft/in) | Track Gauge: 2590 mm (8 ft 6 in ft/in) | Diging Reach - Mono Boom: 11860 mm (38 ft 11 in ft/in) | Ground Level Reach - Mono Boom: 11670 mm (38 ft 3 in ft/in)
  • Shoe: 800 mm (32 inches)
  • Mono Boom: 11290 mm (37 ft ft/in)
  • Maximum: 3600 mm (11 ft 10 in ft/in)
  • Undercarriage: 3390 mm (11 ft 1 in ft/in)
  • On Ground: 4050 mm (13 ft 3 in ft/in)
  • Undercarriage: 4940 mm (16 ft 2 in ft/in)
  • 510 mm (20 inches)
  • Dig - Mono Boom: 10750 mm (35 ft 3 in ft/in) | Dump - Mono Boom: 7630 mm (25 ft ft/in)
  • Dig - Mono Boom: 8180 mm (26 ft 10 in ft/in) | Dig 2.44m / 8'ft flat bottom: 8040 mm (26 ft 5 in ft/in)
  • over standard tracks: 3390 mm (11 ft 1 in ft/in)
  • 630 ltr (166 gallons US)
  • 180 ltr (48 gallons US)
  • 35090 kg (77360 lbs)
  • Number Of Carrier Rollers - Each Side: 2 | Number Of Track Rollers - Each Side: 8