2025 Generac Mobile Stationary Generators MD600

Information

2025 Generac Mobile Stationary Generators MD600

Generac designs and manufactures key components in a vertically integrated environment, ensuring the highest reliability and quality standards. The generator engines can be easily serviced by a qualified diesel technician.

Features may include:

GENERATOR ENCLOSURE
  • Generac manufactures its own genset enclosures, ensuring each diesel generator unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
INDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® CONTROLLER
  • Generac engineers its generator controls with safety and convenience as top priorities.
GENERATOR PARALLELING
  • Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.

Photos

Highlights

  • Edmonton, Alberta
  • 2025
  • Generac Mobile
  • Stationary Generators MD600
  • Ultra Low Sulfur Diesel #2
  • Available

Specifications

  • 2025
  • Generac Mobile
  • Stationary Generators
  • MD600
  • General
  • Perkins
  • 6
  • In-Line | Type: Pre-Combustion
  • 1,106.36 in3 (18.13 L)
  • 5.71 in (145 mm)
  • 7.20 in (183 mm)
  • 14.5:1
  • Air Method: Turbocharged/Aftercooled
  • Electronic Isochronous
  • Type: Centrifugal | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
  • Horsepower at Rated kW: 909 hp | Three-Phase 277/480 VAC @0.8pf: 600 kW / 902 Amps Three-Phase 346/600 VAC @0.8pf: 600 kW / 722 Amps
  • 1,800 RPM
  • Carburetor: ASTM | Filtering (Microns): Primary 10 - Secondary 2 | Primary Fuel Filter | Secondary Fuel Filter
  • Ultra Low Sulfur Diesel #2
  • MEUI
  • 25% 18.4 gph (69.7 Lph) | 50%: 28.2 gph (88.7 Lph) | 75%: 35.6 gph (124.8 Lph) | 100%: 41.4 gph (156.7 Lph)
  • Size: See Battery Index 0161970SBY | Voltage: (2)-12 VDC
  • Alternator: 70 A
  • System Voltage: 24 VDC | Ground Polarity: Negative
  • Standard Model: K0792124Y23 Poles: 4 | Field Type. Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <3% | Telephone Interference Factor (TIF): <50 | UL2200 GENprotect™ | 12 Leads (3-Phase, Non 600V) | Class H Insulation Material | Vented Rotor | 2/3 Pitch | Skewed Stator | Auxiliary Voltage Regulator Power Winding | Amortisseur Winding | Permanent Magnet Excitation | Sealed Bearings | Automated Manufacturing (Winding, Insertion, Lacing and Varnishing) | Full Load Capacity Alternator | Protective Thermal Switch | Main Line Circuit Breaker
  • Frequency Regulation (Steady State): ±0.25% | Heat Rejection to Coolant: 1,589,760 BTU/hr (466 kW)
  • 1,439 RPM | Piston: 2,161 ft/min (659 m/min)
  • Maximum Operating Ambient Temperature: 122 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199280SSD | Exhaust Temperature (Rated Output - Post Turbo): 1,155 °F (624 °c)
  • Oil: Gear Driven | Inject : Electronic
  • Type: Full Flow
  • Total Fuel Pump Flow (Combustion + Return); 121 goh (457 Lph) | Coolant Flow. 114.1 gpm (432 Lpm)
  • Air Flow (Fan Air Flow Across Radiator) - Open Set: 30,088 cfm (852 m3/min) | Flow at Rated Power: 1,836 cfm (52 m3/min) | Exhaust Flow (Rated Output): 5,085 cfm (144 m3/min)
  • Maximum Additional Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 361 psi (2,489 kPa) | Maximum Allowable Backpressure (Post Silencer): 2.13 inHg (6.9 kPa)
  • Fan Diameter: 38 in (965 mm) | Fuel Supply Line: 0.5 in (12.7 mm) NPT | Fuel Return Line: 0.5 in (12.7 mm) NPT | Fuel Pump Lift: 12 ft (3.7 m)
  • Crankcas: 47.55 qt (45 L)
  • Coolant Capacity: 15.5 gal (58.6 L)
  • Cylinder Head Type: 4-Valve | Standard Model: K0792124Y23 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <3% | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Single Sealed Cartridge | Coupling. Direct via Flexible Disc | Voltage Regulator Type: Digital | Regulation Accuracy (Steady State): ±0.25% | Oil Drain Extension | Air Cleaner | Level 1 Fan and Belt Guards (Open Set Only) | Critical Silencer (Enclosed Units Only) | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Battery Charging Alternator | Battery Cables | Battery Tray | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping (Enclosed Units Only) | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Units Only)
  • Piston Type: Aluminum | Crankshaft Type: I-Beam Section | Stainless Steel Flexible Exhaust Connection | Rubber-Booted Engine Electrical Connections
  • 2 Year Limited Warranty (Standby Rated Units) | 1 Year Limited Warranty (Prime Rated Units)