2025 Generac Mobile Mobile Generators MGG210N2

Information

2025 Generac Mobile Mobile Generators MGG210N2

Our gaseous generators provide cost effective power by using well gas byproduct as fuel. One gaseous generator can save an oil and gas site as much as $200K per year in diesel costs. And natural gas powered generators are seeing more use outside the oil field as well.

They come standard with a flexible engine management system, digital controller with paralleling capabilities, a durable, custom built trailer, a built-in fuel/water separator; and a sound attenuation package.

Our gaseous generators operate on well gas, natural gas or propane and are ready to be deployed for use as prime or backup power for a number of oil field operations, from well pumps to man camps. If you have off the grid power needs we have a product to fit your needs.

Features may include:

Total Control
  • Flexible engine management system
  • Digital controller with paralleling capabilities
Custom Convenience
  • Durable custom-built trailer
  • Built-in fuel/water separator

Photos

Highlights

  • Edmonton, Alberta
  • 2025
  • Generac Mobile
  • Mobile Generators MGG210N2
  • Natural Gas / Wellhead Gas / Liquid Propane
  • Available
  • Standard Enclosure Skid Mounted: 66 in (1.67 m) | Standard Enclosure Trailer Mounted: 102 in (2.59 m)
  • Standard Enclosure Skid Mounted: 92 in (2.33 m) | Standard Enclosure Trailer Mounted: 124 lb (3.15 m)

Specifications

  • 2025
  • Generac Mobile
  • Mobile Generators
  • MGG210N2
  • General
  • Make: PSI
  • Inline
  • 6
  • 677 in3 (11.1 L)
  • 4.84 in(123 mm)
  • 6.1 in (155 mm)
  • 10.5:1
  • Electronic
  • Type: Pressurized Closed Recovery | Capable of Operating at 120 °F (50 °C) Ambient | 50/50 Coolant (50% Ethylene Glycol) | UV/Ozone Resistant Hoses | Closed Coolant Recovery System
  • Electronic
  • Intake Method: Turbocharged / Aftercooled
  • Carburetor: Down Draft | Secondary Fuel Regulator: EPR | Shutoff Solenoid: Standard (Dual) | Automatic changeover Natrual Gas/Liquid Propane Fuel Shutoff Solenoid | Fuel line NPT connection
  • Natural Gas / Wellhead Gas / Liquid Propane
  • Size: See Battery Index A0001839766 | Voltage: 2 X 12 VDC | Two 12V, 1100 CCA, Group 8D Batteries
  • Battery Charger Alternator: Standard
  • System Voltage: 24 VDC | Ground Polarity: Negative (-)
  • StamfordTM UCI274 | Digital AVRBrushless | 4 Pole | 2/3 pitch | Class H insulation |Full Load Capacity Alternator | Sealed Bearing | Permanent Magnet Generator (PMG) Excitation System | 60 Hz
  • Fan Speed RPM: 1,894 - 60 Hz / 1,575 - 50 Hz
  • Frequency Regulation (Steady State): 0.25
  • Prime (NG PRP), 60 Hz 78 dB(A) @ 23 ft (7 m)
  • Oil: Gear Driven
  • Type: Full Flow Spin-On Cartridge
  • Engine Operating Fuel Pressure: 7–11 in. H2O (1.7–2.7 kPa) | Inlet Gas Supply: NG 10 psi min. 20 psi max / LP 1.0 psi min 250 psi max
  • Fan Diameter: 38.0 in (965 mm)
  • Standard Enclosure Skid Mounted: 201 in (5.1 m) | Standard Enclosure Trailer Mounted: 269 in (6.83 m)
  • Standard Enclosure Skid Mounted: 66 in (1.67 m) | Standard Enclosure Trailer Mounted: 102 in (2.59 m)
  • Standard Enclosure Skid Mounted: 92 in (2.33 m) | Standard Enclosure Trailer Mounted: 124 lb (3.15 m)
  • Engine: 32.7 qt (31 L) | Engine Oil Replenishment System: 16 Gallon reservoir tank
  • Standard Enclosure Skid Mounted Operating: 7,290 lb (3,306 kg) | Standard Enclosure Trailer Mounted: 9,890 lb (4,485 kg)
  • Lifter Type: Solid | Fan Type: Pusher | Isolated Mounted Engine Supports | Paper Element Air Filter with Safety Cartridge | Fixed Speed Fan Drive | Oil Drain Extension | Factory Filled Oil and Coolant | Full Flow Gear Pump | Oil level regulator float | ComAp InteliGen NTTMdigital controller400A Main Line Circuit Breaker (MLCB) | Emergency stop | Battery Disconnect Switch | Solenoid Activated Starter Motor | Hour Meter | Automatic Shutdown for High Coolant Temperature and Low Oil Pressure | Connection Lugs Convenience Receptacles | Connection Lugs | Skid-Mounted | High Performance Sound Absorbing Material | Gasketed Doors | Upward Facing Discharge Hood (Exhaust) | Interior Cabinet Light | Fully Lockable Enclosure | Exterior Emergency Stop Switch | Multi Lingual Operating and Safety Decals | Document Holder with Owner’s Manual – Includes AC and DC Wiring Diagrams
  • Connecting Rods: Steel Alloy | Cylinder Heads: Cast Iron OHV | Cylinder Liners: Cast Iron Alloy | Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel Alloy | Intake Valve: High-Temperature Steel Alloy | Exhaust Valve: High-Temperature Steel Alloy | Hardened Valve Seats: High-Temperature Steel Alloy | Heavy Gauge Aluminum Sound Attenuated Enclosure | Stainless Steel Hinges, Door Latches, and Exterior Hardware | White Polyester Powder Paint-UV and Fade Resistant
  • 1 year / Unlimited Hours