Current Generac Mobile Mobile Generators

2025 Generac Mobile Mobile Generators MGG210N2

2025 Generac Mobile Mobile Generators MGG210N2

Swipe to View More

  • Year 2025
  • Make Generac Mobile
  • Model Mobile Generators
Shop Generac Mobile Pre-Owned
Product Details Specifications Photos
2025 Generac Mobile Mobile Generators MGG210N2

2025 Generac Mobile Mobile Generators MGG210N2

  • Year 2025
  • Manufacturer Generac Mobile
  • Model Name Mobile Generators
  • Trim Name MGG210N2
  • Generic Type (Primary) General
  • Engine Manufacturer Make: PSI
  • Engine Type Inline
  • Cylinder Liners 6
  • Displacement 677 in3 (11.1 L)
  • Bore 4.84 in(123 mm)
  • Stroke 6.1 in (155 mm)
  • Compression Ratio 10.5:1
  • Ignition Electronic
  • Cooling Type: Pressurized Closed Recovery | Capable of Operating at 120 °F (50 °C) Ambient | 50/50 Coolant (50% Ethylene Glycol) | UV/Ozone Resistant Hoses | Closed Coolant Recovery System
  • Governor Electronic
  • Intake Design Intake Method: Turbocharged / Aftercooled

2025 Generac Mobile Mobile Generators MGG210N2

Our gaseous generators provide cost effective power by using well gas byproduct as fuel. One gaseous generator can save an oil and gas site as much as $200K per year in diesel costs. And natural gas powered generators are seeing more use outside the oil field as well.

They come standard with a flexible engine management system, digital controller with paralleling capabilities, a durable, custom built trailer, a built-in fuel/water separator; and a sound attenuation package.

Our gaseous generators operate on well gas, natural gas or propane and are ready to be deployed for use as prime or backup power for a number of oil field operations, from well pumps to man camps. If you have off the grid power needs we have a product to fit your needs.

Features may include:

Total Control
  • Flexible engine management system
  • Digital controller with paralleling capabilities
Custom Convenience
  • Durable custom-built trailer
  • Built-in fuel/water separator

Engine

Engine Manufacturer Make: PSI
Engine Type Inline
Cylinder Liners 6
Displacement 677 in3 (11.1 L)
Bore 4.84 in(123 mm)
Stroke 6.1 in (155 mm)
Compression Ratio 10.5:1
Ignition Electronic
Cooling Type: Pressurized Closed Recovery | Capable of Operating at 120 °F (50 °C) Ambient | 50/50 Coolant (50% Ethylene Glycol) | UV/Ozone Resistant Hoses | Closed Coolant Recovery System
Governor Electronic
Intake Design Intake Method: Turbocharged / Aftercooled

Fuel System

Fuel Type Natural Gas / Wellhead Gas / Liquid Propane
Fuel System Carburetor: Down Draft | Secondary Fuel Regulator: EPR | Shutoff Solenoid: Standard (Dual) | Automatic changeover Natrual Gas/Liquid Propane Fuel Shutoff Solenoid | Fuel line NPT connection

Battery

Battery Size: See Battery Index A0001839766 | Voltage: 2 X 12 VDC | Two 12V, 1100 CCA, Group 8D Batteries
Battery Charger Type Battery Charger Alternator: Standard

Electric

Electrical System Voltage: 24 VDC | Ground Polarity: Negative (-)
Alternator StamfordTM UCI274 | Digital AVRBrushless | 4 Pole | 2/3 pitch | Class H insulation |Full Load Capacity Alternator | Sealed Bearing | Permanent Magnet Generator (PMG) Excitation System | 60 Hz

Operational

Operating Speed Fan Speed RPM: 1,894 - 60 Hz / 1,575 - 50 Hz
Operating Conditions Frequency Regulation (Steady State): 0.25

Performance

Noise Level Prime (NG PRP), 60 Hz 78 dB(A) @ 23 ft (7 m)

Hydraulics

Pump Type Oil: Gear Driven
Oil Filter Type: Full Flow Spin-On Cartridge
Maximum Pressure Engine Operating Fuel Pressure: 7–11 in. H2O (1.7–2.7 kPa) | Inlet Gas Supply: NG 10 psi min. 20 psi max / LP 1.0 psi min 250 psi max

Dimensions

Dimensions Fan Diameter: 38.0 in (965 mm)
Length Standard Enclosure Skid Mounted: 201 in (5.1 m) | Standard Enclosure Trailer Mounted: 269 in (6.83 m)
Width Standard Enclosure Skid Mounted: 66 in (1.67 m) | Standard Enclosure Trailer Mounted: 102 in (2.59 m)
Height Standard Enclosure Skid Mounted: 92 in (2.33 m) | Standard Enclosure Trailer Mounted: 124 lb (3.15 m)

Capacities

Oil capacity Engine: 32.7 qt (31 L) | Engine Oil Replenishment System: 16 Gallon reservoir tank

Weights

Weight Standard Enclosure Skid Mounted Operating: 7,290 lb (3,306 kg) | Standard Enclosure Trailer Mounted: 9,890 lb (4,485 kg)

Features

Features Lifter Type: Solid | Fan Type: Pusher | Isolated Mounted Engine Supports | Paper Element Air Filter with Safety Cartridge | Fixed Speed Fan Drive | Oil Drain Extension | Factory Filled Oil and Coolant | Full Flow Gear Pump | Oil level regulator float | ComAp InteliGen NTTMdigital controller400A Main Line Circuit Breaker (MLCB) | Emergency stop | Battery Disconnect Switch | Solenoid Activated Starter Motor | Hour Meter | Automatic Shutdown for High Coolant Temperature and Low Oil Pressure | Connection Lugs Convenience Receptacles | Connection Lugs | Skid-Mounted | High Performance Sound Absorbing Material | Gasketed Doors | Upward Facing Discharge Hood (Exhaust) | Interior Cabinet Light | Fully Lockable Enclosure | Exterior Emergency Stop Switch | Multi Lingual Operating and Safety Decals | Document Holder with Owner’s Manual – Includes AC and DC Wiring Diagrams
Construction Material Connecting Rods: Steel Alloy | Cylinder Heads: Cast Iron OHV | Cylinder Liners: Cast Iron Alloy | Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel Alloy | Intake Valve: High-Temperature Steel Alloy | Exhaust Valve: High-Temperature Steel Alloy | Hardened Valve Seats: High-Temperature Steel Alloy | Heavy Gauge Aluminum Sound Attenuated Enclosure | Stainless Steel Hinges, Door Latches, and Exterior Hardware | White Polyester Powder Paint-UV and Fade Resistant

Warranty

Warranty 1 year / Unlimited Hours

Product Photography