Legacy Equipment Rentals

  • 5445-97 Street NW
  • Edmonton, AB T6E 3H8
  • Call Us: (780) 989-2662
  • https://www.lesales.ca/
Print This Page

2024 Generac Mobile Diesel Generator MLG15M

Information

2024 Generac Mobile Diesel Generator MLG15M

Affordable, Reliable, Mobile Power

The MLG15M diesel generator provides just the right combination of output, flexibility, ruggedness, efficiency and affordability for on-the-go, smaller-to-midsize, single phase power needs.

Tier 4 EPA Approved Engine

Generac Mobile recognizes environmental responsibility and continues to meet emission regulations with the addition of their Interim & Tier 4 Generator line. The MLG15M generator is powered by a Mitsubishi diesel engine. Proven power you can trust, while maximizing fuel efficiency and high performance.

Features may include:

TOUGH
  • Full tubular steel frame, with lockable enclosure
  • Durable, fade resistant, white baked on powder coat finish
  • Stainless steel hinges, exterior hardware and pad lockable door latches
PROVEN RELIABILITY
  • CSA Certified
  • Key switch to preheat (glow plug), start & stop
  • Automatic low oil level / high temp shutdown alerts
  • 70A Start limit main breaker

Photos

Highlights

  • Edmonton, Alberta
  • 2024
  • Generac Mobile
  • Diesel Generator MLG15M
  • Ultra Low Sulfur Diesel | Filtering: 20 at 100% efficiency
  • Available

Specifications

  • 2024
  • Generac Mobile
  • Diesel Generator
  • MLG15M
  • General
  • Mitsubishi® (MVS4L2-W464ML)
  • Final Tier 4
  • Inline-4
  • 107 in3 (1.75 L)
  • 3 in (78 mm)
  • 3.62 in (92 mm)
  • 22:1
  • Naturally Aspirated
  • Ultra Low Sulfur Diesel | Filtering: 20 at 100% efficiency
  • Throttle type
  • 720 CCA | Voltage: 12 (1 qty)
  • System Voltage – VDC: 12 V | Ground Polarity Negative: (-) | Battery Charger Alternator: 12 V – 65 A STD
  • Frequency Regulation (Steady State): ±1%
  • Fan: 2,300 RPm
  • water: Belt Driven | Cooling system: Radiator | Fuel: Engine driven – [gear or belt] | Oil type: Trochid
  • Full-flow, spin-on cartridge
  • Fuel Supply Line Diameter: 0.312 in (7.9 mm) | Fuel Return Line Diameter: 0.188 in (4.7 mm)
  • 14.17 in (360 mm)
  • capacity: 11.6 qt (10.98 l)
  • Fan Type: Pusher