2024 Generac Mobile Diesel Generator MLG15M

2024 Generac Mobile Diesel Generator MLG15M

Swipe to View More

  • Year 2024
  • Make Generac Mobile
  • Model Diesel Generator
2024 Generac Mobile Diesel Generator MLG15M

2024 Generac Mobile Diesel Generator MLG15M

2024 Generac Mobile Diesel Generator MLG15M

Affordable, Reliable, Mobile Power

The MLG15M diesel generator provides just the right combination of output, flexibility, ruggedness, efficiency and affordability for on-the-go, smaller-to-midsize, single phase power needs.

Tier 4 EPA Approved Engine

Generac Mobile recognizes environmental responsibility and continues to meet emission regulations with the addition of their Interim & Tier 4 Generator line. The MLG15M generator is powered by a Mitsubishi diesel engine. Proven power you can trust, while maximizing fuel efficiency and high performance.

Features may include:

TOUGH
  • Full tubular steel frame, with lockable enclosure
  • Durable, fade resistant, white baked on powder coat finish
  • Stainless steel hinges, exterior hardware and pad lockable door latches
PROVEN RELIABILITY
  • CSA Certified
  • Key switch to preheat (glow plug), start & stop
  • Automatic low oil level / high temp shutdown alerts
  • 70A Start limit main breaker

Engine

Engine Manufacturer Mitsubishi® (MVS4L2-W464ML)
Emissions Final Tier 4
Cylinder Liners Inline-4
Displacement 107 in3 (1.75 L)
Bore 3 in (78 mm)
Stroke 3.62 in (92 mm)
Compression Ratio 22:1
Cooling Naturally Aspirated

Fuel System

Fuel Type Ultra Low Sulfur Diesel | Filtering: 20 at 100% efficiency
Fuel Injection Throttle type

Battery

Battery 720 CCA | Voltage: 12 (1 qty)

Electric

Electrical System Voltage – VDC: 12 V | Ground Polarity Negative: (-) | Battery Charger Alternator: 12 V – 65 A STD

Operational

Operating Conditions Frequency Regulation (Steady State): ±1%
Operating Speed Fan: 2,300 RPm

Hydraulics

Pump Type water: Belt Driven | Cooling system: Radiator | Fuel: Engine driven – [gear or belt] | Oil type: Trochid
Oil Filter Full-flow, spin-on cartridge

Dimensions

Dimensions Fuel Supply Line Diameter: 0.312 in (7.9 mm) | Fuel Return Line Diameter: 0.188 in (4.7 mm)
Fan Diameter 14.17 in (360 mm)

Capacities

Cooling System capacity: 11.6 qt (10.98 l)
Features Crankcase: 6.34 qt (6 l)

Features

Features Fan Type: Pusher

Product Photography