2025 Generac Mobile Industrial Transfer Switches psts-2000-5000a-bypass-isolation

Current Generac Mobile Industrial Transfer Switches

Swipe to View More

Year 2025
Make Generac Mobile
Model Industrial Transfer Switches

The Power Series Transfer Switch line features 3 different platforms with multiple technologies to offer the most flexible solutions up to 5,000 AMPs. All platforms are rated for 3 cycle operation with highly reliable mechanisms with safety interlocks. Service entrance models are 100 percent rated and available with integral overcurrent protection. These distinctive Generac models combine an automatic transfer switch with an isolation mechanism and a manual bypass switch to provide redundant power transfer and re-transfer capability for critical-need applications requiring consistent and uninterrupted power to the load.

Features may include:

100 – 5000 Amp

Open with Time Delay Neutral or In-Phase Transfer

Closed Transition

Bypass Isolation

Contactor, Power Frame, or Molded Case Breaker

2, 3, 4 Pole

NEMA 1, 12, 3R, 4 & 4X

UL1008/CSA/NFPA/NEC/ISO/ANSI/OSHPD/IEC

Microprocessor Based Control

Two Wire Start – Any Generator Controller

Service Entrance and Non-Service Entrance Rated

Electric

Electrical Fixed-Mount Open with Inphase or Delayed Transition Amperes: 2,000/2,500–3,200 | Fixed-Mount Open with Inphase or Delayed Transition 2,000/2,500/3,200 Poles: 3-4/3-4 | Fixed-Mount Open with Inphase or Delayed Transition 2,000/2,500/3,200 Load Side, Normal and Standby Source: (6) 1/0-750 MCM Cy/Al / (9) 1/0-750 MCM Cu/Al | Fixed-Mount Open with Inphase or Delayed Transition 2,000/2,500/3,200 Neutral Connection: (24) 4/0-500 MCM Cu/Al / (36) 4/0-500 MCM Cu/Al | Drawout Open with Inphase or Delayed Transition Amperes: 2,000-2,500-3,200 | Drawout Open with Inphase or Delayed Transition 2,000-2,500-3,200 Poles: 3-4/3-4 | Drawout Open with Inphase or Delayed Transition 2,000-2,500-3,200 Load Side, Normal and Standby Source: (6) 1/0-750 MCM / (9) 1/0-750 MCM | Drawout Open with Inphase or Delayed Transition 2,000-2,500-3,200 Neutral Connection: (24) 4/0-500 MCM / (36) 4/0-500 MCM | UL 1008 Withstand and Closing Ratings Ampere Rating: 2,00/2,500/3,000/3,200/4,000/5,000 | UL 1008 Withstand and Closing Ratings 2,00/2,500/3,000/3,200/4,000/5,000 Rating When Used with Upstream Circuit Breaker (3 Cycle 600V-30 Cycle 600V): 100 kA-85 kA/100 kA-85 kA/100 kA-85 kA/100 kA-85 kA/100 kA-85 kA/-85 kA/

Operational

Operating Temperature, Maximum -4 ° to 158 °F (-20 ° to 70 °C)

Dimensions

Height Fixed-Mount Open with Inphase or Delayed Transition 2,000/2,500/3,200: 90.0 in (2,286 mm)/90.0 in (2,286 mm) | Drawout Open with Inphase or Delayed Transition 2,000-2,500-3,200: 90.0 in (2,286 mm)/90.0 in (2,286 mm)

Width Fixed-Mount Open with Inphase or Delayed Transition 2,000/2,500/3,200: 32.0 in (812 mm)/44.0 in (1,117 mm) | Drawout Open with Inphase or Delayed Transition 2,000-2,500-3,200: 32.0 in (812 mm) / 44.0 in (1,117 mm)

Depth, Maximum Fixed-Mount Open with Inphase or Delayed Transition 2,000/2,500/3,200: 48.0 in (1,219 mm)-63.0 in (1,600 mm)/48.0 in (1,219 mm)-63.0 in (1,600 mm) / 48.0 in (1,219 mm)-63.0 in (1,600 mm)/48.0 in (1,219 mm)-63.0 in (1,600 mm) | Drawout Open with Inphase or Delayed Transition 2,000-2,500-3,200: 60.0 in (1,524 mm)-75.0 in (1,905 mm)/60.0 in (1,524 mm)-75.0 in (1,905 mm) / 60.0 in (1,524 mm)-75.0 in (1,905 mm)/60.0 in (1,524 mm)-75.0 in (1,905 mm)

Weights

Weight Fixed-Mount Open with Inphase or Delayed Transition 2,000/2,500/3,200: 1,050 lbs (477 kg)-1,600 lbs (727 kg)/1,250 lbs (568 kg)-1,800 lbs (818 kg) / 1,900 lbs (864 kg)- 2,400 lbs (1,091 kg)-2,000 lbs (909 kg)-2,500 lbs (1,136 kg) | Drawout Open with Inphase or Delayed Transition 2,000-2,500-3,200: 1,600 lbs (727 kg)-2,100 lbs (955 kg)/1,900 lbs(864 kg)-2,400 lbs (1,091 kg) / 2,500 lbs (1,136 kg)-3,000 lbs (1,364 kg)/2,800 lbs (1,273 kg)-3,300 lbs (1,500 kg)

Features

2025 Generac Mobile Industrial Transfer Switches psts-2000-5000a-bypass-isolation