2025 Generac Mobile Industrial Transfer Switches 301-600a

Current Generac Mobile Industrial Transfer Switches

Swipe to View More

Year 2025
Make Generac Mobile
Model Industrial Transfer Switches

New to the Generac industrial transfer switch line is the TX Series. The TX Series switches are both Generac designed and built in house with exceptional features that meet, and exceed, any application needs. These transfer switches have some of the highest withstand and closing ratings (WCR). In addition, these switches offer no PPE needed for controller use, firmware updates, or data downloads when the enclosure door is installed.

Electric

Electrical Normal 75 °C Wire: (2) 600 - 2/0 | Normal Wire Lug Torque: 450 lb/in (50.8 Nm) | Standby/Load Source 75 °C Wire: (2) 750 - 2 | Standby/Load Wire Lug Torque: 620 lb/in (50.8 Nm) | Neutral Connection: (8) 600 - 4 or (16) 250 - 1/0 | Neutral Wire Lug Torque: 375 lb/in (31.1 Nm) | Ground Connection: (10) 350 - 6 | UL 1008 Withstand and Closing Ratings Ampere Rating: 600 | UL 1008 Withstand and Closing Ratings Service Entrance: 100 kA / 35 kA | UL 1008 Withstand and Closing Ratings Voltage: Up to 480 / Up to 600

Dimensions

Dimensions 600A 2 & 3 Pole: 13.3 in (339 mm) / 2.7 in (70 mm) / 23.2 in (590 mm) / 23.4 in (59 mm) / 24.8 in (629 mm) / 47.2 in (1199 mm) / 48.6 in (1234 mm) / 41.3 in (1048 mm) / 69.7 in (1771 mm) / 69.5 in (1766 mm) / 72.5 in (1841 mm) / 5.8 in (148 mm) / 7.2 in (182 mm) / 8.2 in (208 mm) / 9.5 in (242 mm) / 17.9 in (455 mm) | 600A 4 Pole: 13.3 in (339 mm) / 2.7 in (70 mm) / 23.2 in (590 mm) / 23.4 in (594 mm) / 24.8 in (629 mm) / 47.2 in (1199 mm) / 48.6 in (1234 mm) / 41.3 in (1048 mm) / 69.7 in (1771 mm) / 69.5 in (1766 mm) / 72.5 in (1841 mm) / 5.8 in (148 mm) / 7.2 in (182 mm) / 8.2 in (208 mm) / 9.5 in (242 mm) / 17.9 in (455 mm)

Weights

Weight 600A 2 & 3 Pole: 2–Pole: 445 lbs (201.8 kg) / 3–Pole: 465 lbs (210.9 kg) | 600A 4 Pole: 485 lbs (220 kg)

Features

Features Small Footprint, Results in Easy Mounting and Installation for Reduced Time and Costs | Floor Mounted, Wall Secured | Cable Entry is Top or Bottom | Double-Throw, Stored Energy Transfer Mechanism | Can be Electrically Isolated while Energized | Graphical LCD-Based Display for Programming, System Diagnostics and Help Menu Display Mimic | Diagram with Source Available and Connected | Method of Transfer: Open with Inphase Transition | Mechanically Interlocked to Prevent Connection of Both Sources | Modbus® RTU | TXC 100 Controller | Operating Temperature -4 ° to 158 °F (-20 ° to 70 °C) | Removable Top and Bottom Plates for Ease of Entry | Voltage Agnostic* | High Withstand and Closing Ratings | Heater Kit Standard on All 3R Enclosures | Auxiliary Input Includes: Permissive Inputs (24VDC) | General Alarm Indication | Three Phase Under and Over Voltage Sensing on Normal and Emergency Sources | Under and Over Frequency Sensing on Normal and Emergency | Selectable Settings: Single or Three Phase Voltage | Sensing on Normal and Emergency 60 Hz | Phase Sequence Sensing for Phase Sensitive Loads | 2-wire Start | 3-wire Start from C Contact for Circuit Monitoring | Switch Position Indication (2 Form C) | Signal Before Transfer (Elevator) | General Alarm | Emergency Inhibit (Permissive & Load Shed) | Go to Emergency | Manual Generator Retransfer | Front Programmable Control Reduces PPE Needs and Arc Flash Hazard | Built in Battery Backup – Increases Switch Reliability and Reduces Switch Transition Time to Alternate Source | Battery Backup Able to Power the Controller for up to 60 Minutes in the Event of No Source Availability | Generator Battery Backup for Controller | Accessible USB Port for Easy Data Downloads, Firmware Updates without Requiring PPE, Reducing the Risk of Arc Flash | All Amp Nodes Offered with Delayed Transition | Heater Programmable through Control for Desired Temperature and Humidity Settings | Front Accessible Customer Connections | Time-Stamped Event History Log | Programmable Exerciser – Daily, Weekly, Biweekly, Monthly

Warranty

Warranty 2 Year Standard Warranty

2025 Generac Mobile Industrial Transfer Switches 301-600a